User's Manual
8
3.1.6.6 Heat cycle test
(complete unit)
After this test, mouse
shall be left at room
temperature for 1 hour,
relative humidity < 95%
High temperature
Low temperature
Dwell time
Total cycles
65 ± 2 °C
-10 ± 2 °C
60 minutes at high, 60
minutes at low
5 cycles
65 ± 2 °C
-10 ± 2 °C
60 minutes at high, 60
minutes at low
5 cycles
3.1.6.7 PCB heat cycle test
After this test, mouse
shall be left at room
temperature for 1 hour,
relative humidity < 95%
High temperature
Low temperature
Dwell time
Total cycles
65 ± 2 °C
-15 ± 2 °C
30 minutes at high, 30
minutes at low
200 cycles
65 ± 2 °C
-15 ± 2 °C
30 minutes at high, 30
minutes at low
200 cycles
3.1.6.8 Shock test Total cycles
Height
Floor condition
6 drops
65 cm
Plastic floor tile
6 drops
65 cm
Plastic floor tile
3.1.6.9 Electrostatic discharge
(ESD) Level I
Level
Cycles
Conditions
Function
± 10 kV
3 times
150 pF, 330 Ohm
Unit shall function as
specified in this
document after testing.
± 10 kV
3 times
150 pF, 330 Ohm
Unit shall function as
specified in this
document after testing.
3.1.6.10 Electrostatic discharge
Level II
Level
Cycles
Conditions
Function
± 15 kV
3 times
150 pF, 330 Ohm
No physical damage to
electronic components
shall result from test.
± 15 kV
3 times
150 pF, 330 Ohm
No physical damage to
electronic components
shall result from test.
3.1.6.11 Color box packaged unit
shock test
Total cycles
Height
Floor condition
6 faces
2 edges
1 corner
65 cm
Plastic floor tile
3.1.6.12 Color box packaged unit
vibration test
Frequency
Force
Dwell time
Direction
Cycles
5 to 50 Hz
3.0 g
6 minutes each axis
3 axis vibration
10 cycles
3.1.7 Manufacturing Requirement
The objective is to drive the manufacturing cost down through fewer parts, higher volume, lower SMT cost,
higher yield and lower manufacturing overhead.
3.1.7.1 Design and Construction
The unit shall be designed with consumer grade parts and construction techniques.
3.1.7.2 Enclosures
The customer shall provide industrial design and tooling.
3.1.7.3 Labeling
3.1.7.3.1 Mouse Unit Labeling
Silkscreen of company logo on top of unit – Customer will provide silkscreen film and computer files.