User's Manual

6
3.1.2 Interface Description
3.1.2.1 Mouse Unit Interfaces
The mouse unit external interfaces are contained in Table 4 below.
Table 4. Transmitter Main Unit External Interface Requirements
Rqmt No. Interface Description Value
3.1.2.1.1 8 ID select ID select switch SWITCH
3.1.2.2 Base Unit Interfaces
The base unit external interfaces are contained in Table 5 below.
Table 5. Base Unit Interface Requirements
Rqmt No. Interface Description Value
3.1.2.2.1 8 ID select 8 ID select switch SWITCH
3.1.2.2.2 PC interface The USB mode is using the low speed
interface defined the USB specification.
IBM USB mouse
compatible and
Microsoft
IntelliMouse
compatible
3.1.2.2.3 PC interface Cable length
Cable color
130 cm
Black
3.1.2.2.4 Receive signal
indicator
Indicator light showing presence of
wireless mouse signal
- Receive ID
Single RED color
LED
3.1.3 Physical Characteristics
3.1.3.1 Mouse Unit Physical Characteristics
The board design parameters are shown in Table 6.
Table 6. Mouse Unit Physical Characteristics
Rqmt No. Parameter Description Value
3.1.3.1.1 Outline dimensions
Length
Width
Height
Maximum length
Maximum width
Maximum height
120mm
60mm
22mm
3.1.3.1.2 Battery Provide room for
battery compartment
AAA x 2 (two pieces)
Type 3 Alkaline battery
3.1.3.2 Base Unit Physical Characteristics
The board design parameters are shown in Table 7.
Table 7. Base Unit Physical Characteristics
Rqmt No. Parameter Description Value