Operation Manual

Twitter™ and Facebook posts are not covered under the terms of Creative Commons.
Legal Notices | Online Privacy Policy
To the top
Reel ID
CLIP NAME
Replacements
FLIPS AND FLOPS
M2 (Time Warp)
K (Key)
About footage references
An EDL can reference footage with a clip name and reel ID. If the reel ID information is not present, SpeedGrade can use the clip name. If both
are present, SpeedGrade references the reel ID first
Sometimes, the reel ID and clip name information don’t match and the footage can't be associated automatically. In this case, you can drop
material manually from the Desktop on the placeholder reels.
Dissolves
Dissolves between clips according to an EDL are available as A and B layer with a dissolve layer in between. All three layers are generated
automatically when conforming an EDL.
Supported EDL features
The CMX reel ID is the primary means of identification for a clip. If possible, place reel footage in subfolders with the Reel ID provided in
the 3600 EDL.
SpeedGrade supports the FROM CLIP NAME syntax in a CMX comment. Clip name is the secondary means of identification for a
clip. If the Reel ID provided is not found or the Reel ID is AX, the clip name is used.
The syntax REEL AX IS CLIP is supported.
Vertical and horizontal mirroring is supported. The FLIP, FLOP, and FLIP-FLOP comment keywords are evaluated.
M2 speed change/time warp commands are supported. Reverse playback is supported.
Key commands are not supported and result in an error at load time.
36