User Guide

ADOBE PREMIERE PRO 2.0
User Guide
345
Gradient Layer Specifies the clip used as the gradient. The gradient layer must be in the same sequence as the clip to
which you apply Gradient Wipe.
Gradient Placement Specifies how the gradient is positioned and sized in the clip:
• Tile Gradient Creates multiple tiled copies of the gradient.
• Center Gradient Places a single gradient in the center of the clip.
• Stretch Gradient To Fit Resizes the gradient layer horizontally and vertically to fit the entire area of the clip.
Invert Gradient Inverts the position of the gradient layer and the clip affected by the gradient transition.
Linear Wipe effect
The Linear Wipe effect performs a simple linear wipe of a clip in a specified direction.
Wipe Angle Specifies the direction that the wipe travels. For example, at 90˚ the wipe travels from left to right.
Linear Wipe effect: Original image (left) and after applying the Linear Wipe effect (center and right)
Radial Wipe effect
The Radial Wipe effect reveals an underlying clip using a wipe that circles around a specified point.
Start Angle Control specifies the position or angle at which the transition starts. With a start angle of 0˚, the
transition starts at the top of the clip.
Wipe Specifies whether the transition moves clockwise or counterclockwise, or alternates between the two.
Radial Wipe effect: Original image (left) and after applying the Radial Wipe effect (center and right)
Venetian Blinds effect
The Venetian Blinds effect reveals an underlying clip using strips of specified direction and width.
Venetian Blinds effect: Original image (left) and after applying the Venetian Blinds effect (center and right)