User Guide

are often used to route a track’s signal to a submix track for effects processing. The
submix
can return the processed signal to the mix by routing it to the master track, or it can route
the signal to another submix. A send includes a level knob that controls the ratio of the
send track volume to the submix volume. This value is called the wet/dry ratio, with “wet”
referring to the effects-processed submix signal and “dry” referring to the signal from the
send track. A wet/dry ratio of 100% indicates that the wet signal is output at full strength.
The submix volume affects the wet signal, and the send track’s volume affects the dry
signal.
A send can be applied pre-fader or post-fader, which determines whether the track audio
is sent before or after the track’s volume fader is applied. With a pre-fader send, adjusting
the track fader doesn’t affect the output level from the send. A post-fader send maintains
the wet/dry ratio, fading the wet and dry signals simultaneously as you adjust the send
track’s volume.
To route final track output instead of creating a send, see “Routing track output” on
page 183.
To send a track to a submix:
1 If needed, display the sends list in the Audio Mixer window by clicking the triangle to
the right of the automation options menus.
2 Do one of the following:
• To send to an existing submix, choose a submix name from any of the send assignment
pop-up menus in the sends list for the track you want to apply a send to.
Using Help | Contents | Index Back 189
Adobe Premiere Pro Help Mixing Audio
Using Help | Contents | Index Back 189
• To create a new submix and send to it, choose Create Mono Submix, Create Stereo
Submix, or Create 5.1 Submix from any of the five track send assignment pop-up
menus in the sends list in the Audio Mixer window.
Sends
A. Name of submix assigned to send, and Send Assignment pop-up menu B. Send mute C. Control
knob for selected send property D. Send Properties pop-up menu
To edit send (not submix) settings:
1 In the Audio Mixer window, select a send in a track’s sends list.
2 If needed, select the send property you want to edit from the pop-up menu below the
control for the selected send property.
Selecting from the pop-up menu for the selected property
3 Change the value of the property using the control knob above the send assignment
properties menu at the bottom of the sends list.
A
C
D
B
Using Help | Contents | Index Back 190
Adobe Premiere Pro Help Mixing Audio
Using Help | Contents | Index Back 190
To designate a send as pre-fader or post-fader:
Right-click a send in the Audio Mixer window, and choose Pre-Fader or Post-Fader.
To mute a send:
Click the Mute button next to the send control knob for the selected send property.
To delete a send:
Choose None from the Send Assignment pop-up menu.
Downmixing to fewer channels
Whenever you route track output to a track or device with fewer channels, Adobe