Operation Manual

464
Drawing and painting
Last updated 11/30/2015
Direction lines are always tangent to (perpendicular to the radius of) the curve at the anchor points. The angle of each
direction line determines the slope of the curve, and the length of each direction line determines the height, or depth,
of the curve.
Note: In Illustrator, you can show or hide anchor points, direction lines, and direction points by choosing View > Show
Edges or View > Hide Edges.
Drawing with the Pencil tool
Draw with the Pencil tool
The Pencil tool works primarily the same way in Adobe Illustrator and InDesign. It lets you draw open and closed paths
as if you were drawing with a pencil on paper. It is most useful for fast sketching or creating a hand-drawn look. Once
you draw a path, you can immediately change it if needed.
Anchor points are set down as you draw with the Pencil tool; you do not determine where they are positioned. However,
you can adjust them once the path is complete. The number of anchor points set down is determined by the length and
complexity of the path and by tolerance settings in the Pencil Tool Preferences dialog box. These settings control how
sensitive the Pencil tool is to the movement of your mouse or graphics-tablet stylus.
Draw freeform paths with the Pencil tool
1 Select the Pencil tool .
2 Position the tool where you want the path to begin, and drag to draw a path. The Pencil tool displays a small x
to indicate drawing a freeform path.
As you drag, a dotted line follows the pointer. Anchor points appear at both ends of the path and at various points
along it. The path takes on the current stroke and fill attributes, and remains selected by default.
Draw closed paths with the Pencil tool
1 Select the Pencil tool.
2 Position the tool where you want the path to begin, and start dragging to draw a path.