Operation Manual

358
Typography
Last updated 11/30/2015
To insert a tab character in a table, choose Type > Insert Special Character > Other > Tab.
Repeat tabs
The Repeat Tab command creates multiple tabs based on the distance between the tab and the left indent or the
previous tab stop.
1 Click an insertion point in the paragraph.
2 In the Tabs panel, select a tab stop on the ruler.
3 Choose Repeat Tab from the panel menu.
A Tab-alignment buttons B Tab stop on the ruler C Panel menu
Move, delete, and edit tab settings
Use the Tabs dialog box to move, delete, and edit tab settings.
Move a tab setting
1 Using the Type tool , click an insertion point in the paragraph.
2 In the Tabs dialog box, select a tab on the tab ruler.
3 Do one of the following:
• Type a new location for X and press Enter or Return.
• Drag the tab to a new location.
Delete a tab setting
1 Click an insertion point in the paragraph.
2 Do one of the following:
• Drag the tab off the tab ruler.
• Select the tab, and choose Delete Tab from the panel menu.
• To return to the default tab stops, choose Clear All from the panel menu.