Operation Manual

260
Tex t
Last updated 11/30/2015
Change kenten settings and color
1 Choose Kenten > Kenten from the Character panel menu or Control panel menu.
2 For Kenten Settings, specify the options below:
Kenten Type Select a kenten character, such as Fisheye or White Circ le. Choose Custom to specify a custom
character. You can enter characters directly, or you can specify a character code value for the specified character set.
Position Specify the spacing between the kenten and characters.
Location Select Above/Right to attach kenten above horizontal text or to the right of vertical text, and Below/Left
to attach below horizontal text or to the left of vertical text.
Size Specify the size of the kenten character.
Align Specify whether the kenten should be displayed in the center (Center) or to the left (Left) (above for vertical
text) of the character's embox.
H/Scale and V/Scale Specify the scale for the height and width of the kenten character.
3 To change the color of the kenten, choose Kenten Color from the list box, and then specify the options below:
• Select a color swatch from the list box.
• Specify the degree of tinting and line weight, as necessary.
• Select Overprint Fill or Overprint Stroke to set filling or stroke overprint for kenten characters.
(See Determining when to overprint manually.)
4 Click OK.
Align text of different sizes
You can specify how to align text to the largest characters in a line using the Character Alignment option, when
positioning characters of different sizes in 1 line. It is possible to align characters to the top, center or bottom of the
embox (right, center, and left for vertical frames), to the roman baseline, and to the top or bottom of the ICF box (right
or left for vertical frames). ICF (Ideographic Character Face) is the average height and width used by the font designer
to design the ideographic characters which comprise a font.
A Align different size letters above full space letters B Align different size letters in the middle of full space letters C Align different size letters
below full space letters
Note: The Character Alignment option is not effective, even if applied, when all characters are the same size in a line.
1 Select a range of text or lines for the characters you want to align, or select a text frame using the selection tool.
2 Choose one of the following options from Character Alignment in the Character panel menu or Control panel
menu.
• Roman Baseline aligns the small characters in a line to the large character baseline grid.