Operation Manual

240
Tex t
Last updated 11/30/2015
A A Space Before value of 0P10 moves the object and it’s associated text further away from the text line above it. B A Space After value of 0p10
moves the object and the text line above it further away from its associated text line (below).
Note: Anchored objects set to Above Line will always remain with the line that holds the anchor; the text won’t compose
such that the object is on the bottom of one page and the anchor marker’s line is at the top of the next page.
Custom position options
You can use the following options when positioning a custom-positioned anchored object. You can specify these
options in the Insert Anchored Object dialog box or the Anchored Object Options dialog box. For step-by-step
instructions for using these options, see
Position a custom-positioned anchored object.
Relative To Spine Specifies whether the object aligns relative to the document spine. When you select this option, the
Anchored Object Reference Point proxy displays as a two page spread. The two pages mirror each other. When selected,
objects positioned on one side of a spread, for instance the outside margin, remain on the outside margin even when
the text reflows to a facing page.
A Relative To Spine not selected: the object remains on the left side of the text frame when text reflows across to the right side of the spread.
B
Relative To Spine selected: the object remains on the outside edge of the page when the text reflows to the right side of the spread.