Operation Manual

171
Layout and design
Last updated 11/30/2015
• To convert all instances of the text variable in the document, choose Type > Text Variables > Define, select the
variable, and then click Convert To Text.
Import text variables from another document
1 Choose Type > Text Variables > Define.
2 Click Load, and then double-click the document that has the variables you want to import.
3 In the Load Text Variables dialog box, make sure that a check mark appears next to the variables you want to import.
If any existing variable has the same name as one of the imported variables, choose one of the following options
under Conflict With Existing Text Variable, and then click OK:
Use Incoming Definition Overwrites the existing variable with the loaded variable and applies its new attributes to
all text in the current document that used the old variable. The definitions of the incoming and existing variables
are displayed at the bottom of the Load Text Variables dialog box so that you can view a comparison.
Auto-Rename Renames the loaded variable.
4 Choose OK, and then click Done.
You can also copy variables to other documents when you synchronize a book file.
More Help topics
Create headers and footers
Define caption variables
Create variables for running headers and footers
Creating type on a path
Create type on a path
You can format text to flow along the edge of an open or closed path of any shape. Apply options and effects to type on
a path: Slide it along the path, flip it over to the other side of the path, or use the shape of the path to distort the
characters. Type on a path has an in port and an out port just like other text frames, so you can thread text to and from it.
You can include only one line of type on a path, so any type that won’t fit on the path will be overset (hidden), unless
you’ve threaded it to another path or text frame. You can add inline or above line anchored objects to type on a path.
You can’t create type on a path using compound paths, such as those that result from using the Create Outlines
command.