User Guide

255
ADOBE INCOPY CS2
User Guide
To add alternating fills to a table
1 With the insertion point in the table, choose Table > Table Options > Alternating Fills.
2 For Alternating Pattern, select the type of pattern you want to use. Select Custom if you want to specify a pattern
such as one row shaded in gray followed by three rows shaded in yellow.
3 Under Alternating, specify the stroke or fill options for both the first pattern and the subsequent pattern. For
example, if you selected Every Second Column for Alternating Pattern, you may want to shade the first two columns
in a gray tint and leave the next two columns blank. Specify 0 for Next if you want the fills to affect every row.
4 Select Preserve Local Formatting if you want previously formatted fills applied to the table to remain in effect.
5 For Skip First and Skip Last, specify the number of rows or columns at the beginning and end of the table in which
you do not want fill attributes to appear, and then click OK.
To turn off alternating strokes and fills for a table
1 Place the insertion point in the table.
2 Choose Table > Table Options > Alternating Row Strokes, Alternating Column Strokes, or Alternating Fills.
3 For Alternating Pattern, choose None, and then click OK.