Manualshelf

Operation Manual

ManualsBrandsAdobe ManualsSoftwareInCopy - 2013
51525354555657585960
object. Deselect this icon if you want to scale the X and Y values separately, which may result in the image being skewed.
4. Enter the horizontal and vertical scale values as either percentages (such as 90%) or distance values (such as 6p).
The scale values can be negative numbers.
5. Do one of the following:
To preview the effect before you apply it, select Preview.
To scale the object, click OK.
To scale the graphic in a specific direction, use the Position tool to drag the handle of a selected graphic. Pressing Shift forces proportional
scaling.
Rotate a graphic
1. Make sure the frame with the desired object is checked out to you, and then select the object using the Position tool .
2. Choose Object > Transform > Rotate.
3. Enter the rotation angle, in degrees, in the Angle text box. Enter a negative angle to rotate the object clockwise; enter a positive angle to
rotate the object counterclockwise.
4. Do one of the following:
To preview the effect before you apply it, select Preview.
To rotate the object, click OK.
Shear a graphic
1. Make sure the frame with the desired object is checked out to you, and then select the object using the Position tool .
2. Choose Object > Transform > Shear.
3. In the Shear dialog box, enter the new shear angle.
The shear angle is the amount of slant to be applied to the object, relative to a line perpendicular to the shear axis. (Shear angle is
calculated clockwise from the current axis.)
4. Specify the axis along which the object is to be sheared. You can shear an object along a horizontal, a vertical, or an angled axis.
If you choose an angled axis, enter the angle of the axis that you want, in degrees, relative to the perpendicular axis.
5. Do one of the following:
To preview the effect before you apply it, select Preview.
To shear the object, click OK.
Clear transformations to a graphic
1. Make sure the frame with the desired object is checked out to you, and then select the object using the Position tool .
2. Choose Object > Transform > Clear Transformations.
Legal Notices | Online Privacy Policy
50