Operation Manual

ADOBE AUDITION 3.0
User Guide
189
Pre- and post-fader effect and send routing for each track
A. Input gain B. EQ C. Track volume D. Track mute E. Send F. Effects Rack
1 In the Sends area of the Main panel or Mixer, click the Send Power button .
2 Click the Pre-Fader/Post-Fader button to place the send either before track volume or after .
3 Set Volume and Pan.
4 From the Output menu, select a bus.
See also
“Routing audio to buses, sends, and the Master track” on page 186
“Set track output volume” on page 184
“Pan tracks in stereo or sum them to mono” on page 189
“Insert effects before or after sends and EQ” on page 109
Pan tracks in stereo or sum them to mono
• Drag the Pan knob in the Main panel or Mixer.
Hold down Shift to change settings in 10-unit increments. Hold down Ctrl to change settings in fractional increments
of one-tenth.
• Click the Sum To Mono button in the Mixer.
See also
“Set track output volume” on page 184
“Automating track settings” on page 204
ABCD
F
E