Operation Manual

185
Layout and design
Last updated 11/30/2015
Dreamweaver resets the width specified in the code to match the visual width.
Clear all set widths or heights in a table
1 Select the table.
2 Do one of the following:
• Select Modify > Table > Clear Cell Widths, or Modify > Table > Clear Cell Heights.
• In the Property inspector, (Window > Properties), click the Clear Row Heights button or the Clear Column
Widths button .
• Click the table header menu, then selectClear All Heights or Clear All Widths.
Clear a column’s set width
?
Click in the column, click the column header menu, and select Clear Column Width.
Enable or disable table and column widths and menus
1 Select View > Visual Aids > Table Widths.
2 Right-click (Windows) or Control-click (Macintosh) in the table, then select Table > Table Widths.
Add and remove rows and columns
To add and remove rows and columns, use the Modify > Table or column header menu.
Pressing Tab in the last cell of a table automatically adds another row to the table.
Add a single row or column
?
Click in a cell and do one of the following:
• Select Modify > Table > Insert Row or Modify > Table > Insert Column.
A row appears above the insertion point or a column appears to the left of the insertion point.
• Click the column header menu, and then select Insert Column Left or Insert Column Right.