User's Manual

354
ADOBE PHOTOSHOP CS2
User Guide
Luminance noise may be more pronounced in one channel of the image, usually the blue channel. You can adjust the
noise for each channel separately in Advanced mode. Before opening the filter, examine each channel in your image
separately to seeifnoise is prevalentinone channel. Youpreservemoreimage detail by correcting onechannel rather
than making an overall correction to all channels.
To reduce image noise and JPEG artifacts
1 Choose Filter > Noise > Reduce Noise.
2 Zoom in on the preview image to get a better view of image noise.
3 Set options:
Strength Controls the amount of luminance noise reduction applied to all image channels.
Preserve Details Preserves edges and image details such as hair or texture objects. A value of 100 preserves the most
image detail, but reduces luminance noise the least. Balance the Strength and Preserve Details controls to fine-tune
noise reduction.
Reduce Color Noise Removes random color pixels. A higher value reduces more color noise.
Sharpen Details Sharpens theimage.Removingnoise reducesimage sharpness. Usethe sharpening controlinthe
dialog box or use one of the other Photoshop sharpening filters later to restore sharpness.
Remove JPEG Artifacts Removes blocky image artifacts and halos caused by saving a image using a low JPEG
quality setting.
4 If luminance noise is more prevalent in one or two color channels, click the Advanced button and then choose the
color channel from the Channel menu. Use the Strength and Preserve Details controls to reduce noise in that
channel.
Sharpening images
Sharpening images
Sharpening enhances the definition of edges in an image. Whether your images come from a digital camera or a
scanner, most images canbenefit from sharpening.The degree of sharpening needed varies dependingonthe quality
of the digital camera or scanner. Keep in mind that sharpening cannot correct a severely blurred image.
Notes and tips about sharpening:
• Sharpen your image on a separate layer so that you can resharpen it later if you need to output it to a different
medium.
• If you sharpen your image on a separate layer, set the layer’s blending mode to Luminance to avoid color shifts
along edges.
• Sharpening increases image contrast. If you find that highlights or shadows are clipped after you sharpen, use the
layer blending controls (if you sharpen a separate layer) to prevent sharpening in highlights and shadows. See “To
specify a tonal range for blending layers” on page 413.
• If you need to reduce image noise, do so before sharpening so that you don’t intensify the noise.