Operation Manual

340
USING ACROBAT X STANDARD
Printing
Last updated 10/11/2011
2 Set options for PostScript printers, and then click OK.
Note: Acrobat sets the PostScript level automatically, based on the selected printer.
PostScript options
Use the PostScript Options panel of the Advanced Print Setup dialog box to set options for a particular PostScript
printer. These options include how to handle nonresident printer fonts and whether to download Asian fonts. If a PDF
contains device-dependent settings, such as halftones and transfer functions, these settings can be sent in the
PostScript output to override the default settings in the printer. To use these options, you must be connected to a
PostScript printer or have a PostScript printer driver installed with a PPD file selected.
Font And Resource Policy Specifies how fonts and resources in the document are sent to a printer when those fonts
and resources aren’t present on the printer.
• Send At Start Downloads all fonts and resources at the start of the print job. The fonts and resources remain on the
printer until the job has finished printing. This option is the fastest but uses the most printer memory.
• Send By Range Downloads fonts and resources before printing the first page that uses them, and then discards
them when they are no longer needed. This option uses less printer memory. However, if a PostScript processor
reorders the pages later in the workflow, the font downloading can be incorrect, resulting in missing fonts. This option
does not work with some printers.
• Send For Each Page Downloads all fonts and resources for a given page before the page prints, and then discards
the fonts when the page has finished printing. This option uses the least printer memory.
Language Specifies the level of PostScript to generate for the pages. Choose the level of PostScript appropriate for your
printer.
Download Asian Fonts Prints documents with Asian fonts that aren’t installed on the printer or embedded in the PDF.
The Asian fonts must be present on the system.
Discolored Background Correction Prevents printing problems like red boxes over graphics, or pages printing
mirrored or upside down. These problems can occur when Acrobat or Reader cannot use the default Color Rendering
Dictionaries (CRDs) on some PostScript printers.
Print As Image Prints pages as bitmap images. Select this option if normal printing doesn’t produce the desired results,
and specify a resolution. This option is available only for PostScript printers.
Downloading Asian fonts to a printer
Select the Download Asian Fonts option in the Advanced Print Setup dialog box if you want to print a PDF with Asian
fonts that aren’t installed on the printer or embedded in the document. Embedded fonts are downloaded whether or
not this option is selected. You can use this option with a PostScript Level 2 or higher printer. To make Asian fonts
available for downloading to a printer, be sure you have downloaded the fonts to your computer using the Custom or
Complete installation option during installation of Acrobat.
If Download Asian Fonts is not selected, the PDF prints correctly only if the referenced fonts are installed on the
printer. If the printer has similar fonts, the printer substitutes those. If there are no suitable fonts on the printer,
Courier is used for the text.
If Download Asian Fonts does not produce the results you want, print the PDF as a bitmap image. Printing a document
as an image may take longer than using a substituted printer font.
Note: Some fonts cannot be downloaded to a printer, either because the font is a bitmap or because font embedding is
restricted in that document. In these cases, a substitute font is used for printing, and the printed output may not match
the screen display.