Operation Manual

333
USING ACROBAT X STANDARD
Printing
Last updated 10/11/2011
Pages Specifies the range of pages to print in the open PDF. Separate numbers in a range by using a hyphen, and
separate multiple pages or ranges by using commas or spaces. If the Use Logical Page Numbers option is selected in
Page Display Preferences, you can enter numbers that match the numbering printed on the pages using roman
numerals or actual page numbers. For example, if the first page of a document is numbered iii, you can enter iii or 1
to print that page. Selecting Odd Pages Only or Even Pages Only affects which pages in a range print. For example, in
a range that includes 2, 7–10 with Even Pages Only selected, only pages 2, 8, and 10 will print.
To print from a specific page to the end of the document, enter the page with a hyphen. For example, “11-” prints page
11 to the last page of the document.
Subset Choose All Pages In Range, or choose Odd Pages Only or Even Pages Only to print only those pages within
the specified range.
Reverse Pages Prints pages in reverse order. If page ranges are entered, the pages print opposite of the order in which
they were entered. For example, if the Pages box shows 3–5, 7–10, selecting Reverse Pages prints pages 10–7, and then
5–3.
Page Scaling Reduces, enlarges, or divides pages when printing.
• None Prints the upper left or center of a page (if auto-rotated and centered) without scaling. Pages or selections
that don’t fit on the paper are cropped. You can set this option as the default using the None print preset. See
“Create
print presets” on page 335.
• Fit To Printable Area Reduces or enlarges each page to fit the printable area of the currently selected paper size. For
PostScript® printers, the PPD determines the printable area of the paper.
• Shrink To Printable Area Shrinks large pages to fit the currently selected paper size but doesn’t enlarge small pages.
If an area is selected and is larger than the printable area of the currently selected paper, it’s scaled to fit the printable
area. This option is always active during N-up printing. You can set this option as the default using the Default print
preset. See
“Create print presets” on page 335.
• Tile Large Pages Applies tiling to pages that are larger than the selected paper size at the specified scale. These
pages are mapped to multiple sheets of paper. If this option is selected, you can also specify settings for Tile Scale,
Overlap, Cut Marks, and Labels.
• Tile All Pages Applies tiling to all pages, regardless of size. However, only the pages that are larger than the selected
paper size at the specified scale are mapped to multiple sheets of paper. If this option is selected, you can also specify
settings for Tile Scale, Overlap, Cut Marks, and Labels.
• Multiple Pages Per Sheet Enables N-up printing, where multiple pages print on the same sheet of paper. If this
option is selected, you can also specify settings for Pages Per Sheet, Page Order, Print Page Border, and Auto-Rotate
Pages.
Note: N-up printing in Acrobat is independent of the N-up printing features of printer drivers. The Acrobat print settings
don’t reflect the N-up settings of the printer drivers. Select N-up printing either in Acrobat or in the printer driver, but
not both.
• Booklet Printing Prints multiple pages on the same sheet of paper in the order required to read correctly when
folded. The printer must support duplex printing (printing on both sides of the sheet). Acrobat automatically enables
duplex printing, if available, for booklet printing.
Pages Per Sheet Prints a predefined number of pages, or a custom number (up to 99), horizontally and vertically
during N-up printing. If you select a predefined number from the menu, Acrobat automatically selects the best paper
orientation.
Page Order Defines how the pages are ordered on paper during N-up printing. Horizontal places pages from left to
right, top to bottom. Horizontal Reversed places pages from right to left, top to bottom. Vertical places pages top to