Operation Manual

314
USING ACROBAT X STANDARD
Multimedia and 3D models
Last updated 10/11/2011
Open Model Tree On 3D Activation Determines whether the Model Tree is displayed when the 3D model is activated.
Choose Use Annotation’s Setting to use whichever setting the author used when adding the 3D model to the PDF.
Default Toolbar State Determines whether the 3D toolbar is shown or hidden when a 3D model is activated. Choose
Use Annotation’s Setting to use whichever setting the author used when adding the 3D model to the PDF.
Enable Selection For The Hand Tool Lets the user select and highlight parts of the 3D model using the Hand tool. If this
option is not selected, use the Object Data tool (Tools > Content > Select Object) to select the object.
Consolidate Tools On The 3D Toolbar Selecting this option places the manipulation and navigation tools under the
Rotate tool, thereby shortening the 3D toolbar.
Enable View Transitions Some 3D models include animated transitions between views. Deselect this option if you
want to prevent this 3D animation.
Show 3D Orientation Axis Turns on or off an in-scene display of an axis that indicates the current orientation of the
3D scene.
Optimization Scheme For Low Framerate Specifies what happens to animations of complex models when the
framerate becomes low. None does not compromise the visuals and leaves the framerate low. Bounding Box shows the
three-dimensional planes enclosing the parts instead of the parts themselves, which keeps the framerate high. Drop
Objects does not show some parts of the model, which keeps the framerate high.
Framerate Threshold Sets the minimum framerate, either by dragging the slider or entering a number in the value box.
If the framerate drops below that number of frames per second, the Optimization Scheme For Low Framerate option
goes into effect.
Comment on 3D designs
Comments added to a 3D object are associated with specific views that are defined when the comments are added. If
the view is changed—for example, if the 3D object is rotated or moved—the comments are no longer visible.
You have three ways to add comments to a 3D object:
• Using the 3D Comment Tool on the 3D toolbar to add comments to specific parts of a 3D model.
• Using the Annotations panel in the Comment pane to add a variety of comment types to a 3D view.
• Converting a 3D measurement into a comment.
Note: Adding comments to 3D model views requires version 7.0.7 or later of Acrobat or Reader.
When the view of a 3D object is changed, any comment associated with that object disappears (right).