Operation Manual

175
USING ACROBAT X STANDARD
Forms
Last updated 10/11/2011
More Help topics
“Create, test, and edit barcode fields” on page 162
“About barcodes” on page 161
Create a new barcode parameters set
1 In the Barcode Field Properties dialog box, click the Options tab, and then click Manage Barcode Parameters.
2 Select the existing parameter set that you want to use as the basis of the new set, and click New.
3 Type a name in the Name box and a description in the Description box.
4 Select options for Symbology, X Dimension, Y/X Ratio, and Error Correction Level, and then click OK.
The newly defined parameter set appears in the list in the Manage Barcode Parameters dialog box, and all the buttons
on the right side of the dialog box become available. The new definition also appears in the Decode Condition menu
in the Options tab of the Barcode Field Properties dialog box.
Edit or delete a set of custom barcode parameters
1 In the Barcode Field Properties dialog box, click the Options tab, and then click Manage Barcode Parameters.
2 Select a custom parameter set from the list.
3 Choose the appropriate action:
• Click Edit and make the changes to the settings; then click OK.
• Click Delete. Confirm the deletion in the message that appears by clicking OK.
Export or import a set of custom barcode parameters
1 In the Barcode Field Properties dialog box, click the Options tab, and then click Manage Barcode Parameters.
2 Choose the appropriate action:
• Select a barcode parameter set from the list and click Export. Select a location and file name for the file that has the
file name extension .bps.
• Click Import, and navigate to and select the BPS file that you want to import.
Redefine form field property defaults
After you change properties for a specific type of form field, you can set those properties as the default set for that type.
For example, you can create a check box, change its properties, and then save the properties as the default values.
1 If necessary, choose Tools > Forms > Edit to go to form-editing mode.
2 Right-click the form field for which you have already changed properties, and choose Use Current Properties As
New Defaults.
Note: Changing the default properties does not change the settings for existing form fields of that type. The new defaults
apply only to new fields that you create.