Operation Manual

45
Workspace
Last updated 4/7/2015
A Measuring toolbar B Object being measured C Measurement Info panel
1 Choose To o ls > Measure.
The measurement toolset is displayed in the secondary toolbar.
2 In the secondary toolbar, click Measuring Tool.
The Measuring toolbar and the Measurement Info panel are displayed.
3 To measure areas of your PDF document, select any of the following measurement types:
• Select the Distance tool to measure the distance between two points. Click the first point, move the pointer
to the second point, and click again.
• Select the Perimeter tool to measure a set of distances between multiple points. Click each point you want
to measure. Then, double-click the last point.
• Select the Area tool to measure the area within the line segments that you draw. Click each point you want
to measure. After you have clicked at least two points, click the first point to complete the area measurement.
4 While measuring objects, do any of the following:
• To snap the measurement to the end of a line, select Snap To Paths .
• To snap the measurement to the endpoint of a line, select Snap To Endpoints .
• To snap the measurement to the midpoint of a line, select Snap To Midpoints .
• To snap the measurement to the intersection of multiple lines, select Snap To Intersections
• To constrain the measurement lines to increments of 45º, hold down the Shift key.
• To discontinue a measurement, right-click and chooseCancel Measurement.
• To delete a measurement markup, click it with theMeasurement Tool and press the Delete key.
Measuring tool options
To set measuring tool options, select the tool, then right-click anywhere in the PDF to view the options.
Change Scale Ratio Change the scaling ratio (such as 3:2) and unit of measurement on the drawing areas.
Change Markup Label Add or change text that appears with the measurement.