Manual

August 2017
⛩
䇶
TO USE:
1. Once unit is in installed and gas connection is set up slide the crumb tray into place.
2. Turn the control knob to the ON position and light the pilot.
3. Adjust the broiler grid position by using the lift handle on the left side of the unit.
4. Pull out the broiler grid and place food onto the cast iron grate. Slide back in under the burners.
5. You can adjust the intensity of the burner by rotating the control knob(s).
CLEANING - NOTE: To maintain cleanliness and increase service life, this item should be cleaned daily. Do not immerse
the unit in water or any other liquid. Before cleaning or attempting to move this item always turn off and let cool.
1. Remove the broiler rack and crumb tray and wash separately.
2. Wipe the entire unit with a clean soft cloth until it is completely dry.
3. To avoid damage to the unit, do not use abrasive cleaners or scouring pads.
4. If soap or chemical cleaners are used, be sure they are completely rinsed away with clean water immediately after
cleaning. Chemical residue could damage or corrode the surfaces of the unit.
Burner
Broiler Grid
Lift Handle
Crumb Tray
Manual Control Knob
PRODUCT FEATURES: