Manual
Table Of Contents
- This manual contains important information regarding your Adcraft unit. Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply with regular maintenance guidelines outlined in this manual may void the...
- 1. Power Switch
- Wiring Diagrams
- 40lb Fryer 75lb Fryer 110lb Fryer
July 2018
TROUBLESHOOTING
Problem: The power indicator does not light up, and the motor doesn’t start after pressing the button.
Possible Causes: Check the connection between the power cord and outlet. If connection is good, then check breaker.
Action: Plug power cord into outlet fully, or switch on the breaker, if off.
Problem: The power indicator lights up, but the motor is not working when the button is pressed.
Possible Causes: The motor is defective.
Action: Replace or fix the motor.
Problem: The oil is not flowing out.
Possible Causes: Either the filtering layer is blocked, the oil tube is leaking, or the pump is defective.
Action: Replace the filtering sheet, reinstall the oil tube, or replace the pump and other needed parts.