Manual

July 2018
OIL FILTRATION SYSTEM
To assemble the filtration system, follow the below instructions and diagram.
Always use a new filtering sheet (sold separately) every time. The filter paper size for this unit measures 17.75” x 13”.
1. Place the square rubber gasket at the bottom of the filtering chamber.
2. Put the stainless steel filtering mesh inside the gasket.
3. Place filtering sheet evenly on top of the filtering mesh and gasket.
4. Place the stainless steel gasket on top of the filtering sheet.
5. For an added filtering boost, sprinkle filter powder (sold separately) on top of the mesh and paper.
CLEANING - NOTE:
To maintain cleanliness and increase service life, this item should be cleaned daily.
Do not immerse the unit in water or any other liquid. If liquid enters the electrical compartment,
it may cause a short circuit or electrical shock.
1. Before cleaning or attempting to move this item, turn off, unplug, and let the unit cool completely.
2. Wipe the entire unit with a clean soft cloth until it is completely dry.
3. To avoid damage to the unit, do not use abrasive cleaners or scouring pads.
4. If soap or chemical cleaners are used, be sure they are completely rinsed away with clean water immediately after
cleaning. Chemical residue could damage or corrode the surfaces of the unit.
To avoid serious injury or damage, never attempt to repair or replace a damaged power cord yourself.
Contact a professional repair service
.
Filter powder
Stainless steel gasket