INSTRUCTION MANUAL Gas Cheesemelter This manual contains important information regarding your unit. Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply with regular maintenance guidelines outlined in this manual may void the warranty.
WARNINGS • Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other equipment • Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death • Read the installation and maintenance instructions thoroughly before installing or servicing this equipment • Have the equipment installed by a qualified installer in accordance with all federal, state and local codes • Do not install or use without all 4 legs • This equ
PRODUCT FEATURES: Burner Broiler Rack Crumb Tray Gas Inlet Pipe Ignition Switch Manual Control Knob TO USE: 1. Once unit is in place and gas connection is set up slide the crumb tray and broiler rack into place. 2. Turn the control knob to the ON position and press the ignition switch. 3. Slide out broiler rack and place food on rack and slide back in at the desired position. 4. You can adjust the intensity of the burner by rotating the control knob(s).
TROUBLESHOOTING Problem Pilot Flame isn’t lighting Pilot Flame isn’t lighting Pilot Flame isn’t lighting Pilot Flame isn’t lighting Pilot Flame isn’t lighting The pilot flame is on but the main burner can’t light The pilot flame is on but the main burner can’t light The pilot flame is on but the main burner can’t light There is a poofing noise when turning gas supply off There is a poofing noise when turning gas supply off There is a poofing noise when turning gas supply off Flame is not solid blue, but i
Parts Diagram for the Gas Cheesemelter August 2018
Parts List for the Gas Cheesemelter Drawing Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Description Top plate of inner chamber Top plate Upper plate to press insulation Infrared Burner Orifice Base Nut to connect aluminum pipe Orifice bracket Rear plate of inner chamber Rear beam Rear plate Thermocouple Pilot bracket Right side assembly Side plate Bottom plate of inner chamber Probe base plate Burner’s gas pipe Pilot’s gas pipe Rubber foot 1/2” angle
ACE Equipment One Year Limited Warranty ACE warrants its equipment against defects in materials and workmanship, subject to the following conditions: ACE Equipment is warranted for one year, effective from the date of purchase by the original owner. A copy of the original receipt or other proof of purchase is required to obtain warranty coverage. This warranty applies to the original owner only, and is not assignable.