Instruction Manual

Introduction 23
TPZ-1300
1.7.5 LVDS Voltage Selected Jumper (optional)
The TPZ-1300 can support +3.3V and +5V for the LVDS power
panel, with power of the LVDS interface (+LVDS_VCC) selected
by internal jumper. default jumper setting is 5 V, as follows.
Table 1-12: LVDS Voltage Selected Jumper
1.7.6 Mini PCI Express Slot & USIM Socket
The TPZ-1300 features a Mini PCI Express slot providing func-
tional expansion with, for example, wireless LAN module, wireless
WAN module, GPS module, and others. Conforms to PCI Express
Mini Card Electromechanical Specification Revision 1.2.
The USIM Socket allows a wireless WAN module for wireless
communication with a telecom operator, connected to a Mini PCI
Express module. SIM card and Wireless WAN module can be
installed to facilitate wireless wide area network communication.
1.7.7 Extra +3.3 V/ +5 V Voltage Internal Connectors
Internal +3.3V and +5V connectors support up to 1A current of
+3.3V and +5V to the Mini PCI Express card if needed, such as for
wireless WAN or GPS card. Pin numbering and definition are as
follows.
+LVDS_VCC: +5V +LVDS_VCC: +3.3V
2
2