User guide

Chapter 4 BIOS Setup
42 Reference Manual Express-IBR
• Hot Plug [Disabled; Enabled]
 Serial ATA Port 3 Empty
• Software Preserve Unknown
• Port 3 [Disabled; Enabled]
• Hot Plug [Disabled; Enabled]
• Intel TXT (LT) Configuration
Intel Trusted Execution Technology Configuration
Intel TXT support only can be enabled/disabled if SMX is enabled. VT and VT-d support must also
be enabled prior to TXT.
Secure Mode Extensions (SMX) Enabled
Intel TXT (LT) Support [Disabled]
• PCH-FW Configuration
 ME FW Version X.X.XX.XXXX
 ME Firmware Mode Normal Mode
 ME Firmware Type Full Sku Firmware
 ME Firmware SKU XMB
• Intel Anti-Theft Technology Configuration
 Intel(R) Anti-Theft Technology [Disabled; Enabled]
 Intel(R) Anti-Theft Technology Recovery [3]
 Enter Intel(R) AT Suspend Mode [Disabled]
• AMT Configuration
 Intel AMT [Disabled; Enabled]
• USB Configuration
 USB Devices:
• X Drives, 2 Hubs
 Legacy USB Support [Enabled; Disabled]
 USB3.0 Support [Enabled; Disabled]
 XHCI Hand-Off [Enabled; Disabled]
 EHCI Hand-Off [Disabled; Enabled]
 USB hardware delays and time-outs:
• USB transfer time-out [1 sec; 5 sec; 10 sec; 20 sec]
• Device reset time-out [10 sec; 20 sec; 30 sec; 40 sec]
• Device power-up delay [Auto; Manual]
 Mass Storage Devices
• Xxxxxxxx XGB [Enabled; Disabled; Auto]
• ADT 7490 H/W Monitor
 Smart Fan Mode Configuration
• Fan1 Smart Fan Mode [Manual Mode; Auto Mode (Module); Auto Mode (ADT 7490); Auto
Mode (CPU)]
• Fan1 expect PWM Output [255]