cPCI-3534 cPCI-3538 4/8 Ports Serial Communication Modules
@Copyright 1996~99 ADLink Technology Inc. All Rights Reserved. Manual Rev 1.00: October 12, 1999 The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
Getting service from ADLink ♦ Customer Satisfaction is always the most important thing for ADLink Tech Inc. If you need any help or service, please contact us and get it. ADLink Technology Inc. Web Site Sales and Service Technical Support TEL Address ♦ http://www.adlink.com.tw service@adlink.com.tw NuDAQ nudaq@adlink.com.tw NuDAM nudam@adlink.com.tw NuIPC nuipc@adlink.com.tw NuPRO nupro@adlink.com.tw Software sw@adlink.com.tw AMB amb@adlink.com.tw +886-2-82265877 FAX +886-2-82265717 9F, No.
ADLink cPCI Multiport Card Comparison Chart Serial port 3534 3538 4~8 8~16 - - CPU Serial communication controller MAX System throughput 16C554 16C554 115.2K*4 115.2K*8 Hardware compatibility cPCI bus cPCI bus DOS Windows (3.1/95/98/NT) LINUX SCO Open Server Four DB25 male cable connector DOS Windows (3.
CONTENTS CONTENTS ................................................................I CHAPTER 1 INTRODUCTION………………………….1 1.1 ABOUT THE SERIAL COMMUNICATION MODULES………..………….1 1.2 OVERVIEW OF CPCI -3534 ....................................................... 2 1.2.1 1.2.2 1.2.3 1.2.4 1.3 What is cPCI-3534?…………………..……….……………………..2 Feature of cPCI-3534 ..........................................................................2 Specification of cPCI-3534......................................................
1 Introduction 1.1 About the Serial Communication Modules The serial communication modules are intelligent serial input/output multi-port controller cards, which go with the new generation of PC platform CompactPCI. The modules can reduce the frequency for serial communication controller to interrupt main CPU on the mainboard to improve the whole system performance. Traditionally, the serial communication controller will interrupt the MPU character by character.
1.2 Overview of cPCI-3534 1.2.1 What is cPCI-3534? The cPCI-3534 is an enhanced four ports serial communication module used for cPCI platform. It includes a PGA to support the serial communication controller and a 37-pin connector to connect external I/O port from the front panel or using the rear IO. The expansion cable has four standard DB25 connectors and one DB37 connector to connect with cPCI-3534 interface card. The R -3534 transition board can support rear IO connection by using one DB37 connector.
§ § § § § § § § § § § Port Capability: 3 independent RS-232C compatible ports 1 isolated RS-422/485 port (DIP switch select) Max. port per system: 8 (2 card) Isolation voltage: 2500VDC Baud rate: Each port can be configured to 50~115,200 bps Operation System Compatibility: DOS, Windows 3.
DB25 male connector pin assignment in cPCI-3534 module for RS-232 interface (port A, B and C). DB25 Pin No. 2 3 4 5 6 7 8 20 Signal Name TXD(OUT) RXD(IN) RTS(OUT) CTS(IN) DSR(IN) GND DCD(IN) DTR(OUT) DB25 male connector pin assignment in cPCI-3534 module for RS-422/485 interface (port D). DB25 Pin No.
J2 connector pin assignment in cPCI-3534 module for RS-232/422/485 interface.
RS -485 N+: Data Signal Positive N-: Data Signal Negative R-3534 Rear IO Daughter Board The R-3534 rear I/O daughter board provides a rear I/O connection transition, the connector and cable used in the rear is the same as the front. DIP Switch and Jumper Setting SW1 ON SW1-1 Card1 SW1-4 RS-422 OFF Card2 RS-485 The JP1 is for the RS422 terminator and the JP2 is for the RS-485 terminator. The terminator is ON while the jumper is ON 1.3 Overview of cPCI-3538 1.3.
§ § § telecommunication Supports up to 2 cards/8 ports per system Supports DOS, Windows 3.1, Windows 95/98, and Window NT operation system Optional isolated RS-232/422/485 interface for each port independently by C888XB 1.3.3 Specification of cPCI-3538 § § § § § § § § § § § § § § § § § § § § § § § Compliant with PCI Spec.2.1 Serial communication controller: 16C550A compatible 1.8432 ~ 7.
1.3.4 Connector Pin Assignment of cPCI-3538 DB62 female connector pin assignment for cPCI-3538. DB62 Pin Signal DB62 Pin Signal DB62 Pin No. Name No. Name No.
J2 connector pin assignment in cPCI-3538 module for RS-232/422/485 interface.
2 Installation This chapter describes the configurations of the serial communication module. At first, the contents in the package and unpacking information that you should care about are described. The serial communication modules are plug-and-play and very easy to install into cPCI system. 2.
2.2 Unpacking Your serial communication module contains sensitive electronic components that can be easily damaged by static electricity. The module should be done on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the anti-static mat. Inspect the module carton for obvious damage. Shipping and handling may cause damage to your module. Be sure there are no shipping and handing damages on the module before processing.
2.4 Hardware Configuration The serial communication module has plug and play component, the card can requests memory usage (I/O port locations) of the card which is assigned by system BIOS. The address assignment is done on a board-by-board basis for all serial communication cards in the system. The jumper SW1-1 for cPCI-3534 and the JP1 for cPCI-3538 is used for the system to recognize the first or second card of the same model in the system if there are two cards of the same on board. 2.
7. We can install up to two same type serial communication cards in one NT system. 8. When you need to install two same type serial communication cards in one NT system, you must confirm to let one card’s SW1-1 is ON while the other card’s SW1-1 is OFF for cPCI-3534 and JP1 is ON while the other card’s JP1 is OFF for cPCI-3538. 9. The card with switch ON will have low COM port number. The card with switch OFF will have higher COM port number follow the card with switch ON. 10.
1. You can install up to two cPCI-3534/3538 cards in one 95/98 system. 2. When you need to install two same type cards in one 95/98 system, you must confirm to let one card’s switch is ON, and the other card’s switch is OFF. 3. The card with switch ON will have COM port number assigned for first card. The card with switch OFF will have COM port number assigned for second card. 4.
Product Warranty/Service Seller warrants that equipment furnished will be free form defects in material and workmanship for a period of one year from the confirmed date of purchase of the original buyer and that upon written notice of any such defect, Seller will, at its option, repair or replace the defective item under the terms of this warranty, subject to the provisions and specific exclusions listed herein.
