User Manual

Chapter 4 BIOS Setup
42 Reference Manual CoreModule 720
• SDIO Configuration
 SDIO Access Mode [Auto; DMA; PIO]
• Thermal Configuration
 Critical Trip Point [POR; 30 C; 40 C; 50 C; 60 C; 70 C; 80 C; 90 C; 95 C]
 Active Trip Point [Disabled; 30 C; 40 C; 50 C; 60 C; 70 C; 80 C; 90 C; 95 C; 100 C]
 Passive Trip Point [Disabled; 30 C; 40 C; 50 C; 60 C; 70 C; 80 C; 90 C; 95 C; 100 C]
• Passive TC1 Value [1]
• Passive TC2 Value [5]
• Passive TSP Value [10]
 Thermal Offset [Disabled; Enabled]
 DTS Calibration [Disabled; Enabled]
• USB Configuration
 USB Devices:
1 Keyboard
• Legacy USB Support [Disabled; Enabled]
• EHCI Hand-off [Disabled; Enabled]
 USB hardware delays and time-outs:
• USB transfer time-out [1 sec; 5 sec; 10 sec; 20 sec]
• Device reset time-out [10 sec; 20 sec; 30 sec; 40 sec]
• Device power-up delay [Auto; Manual]
• ADM1032 H/W Monitor
 CPU Health Status
• CPU Temp : +XX
• Serial Port Console Redirection
 COM0 (Pci Bus2, Dev10, Func1)
• Console Redirection [Disabled; Enabled]