User's Manual

DOC#NCP-R4600 GEN2-SOW
1.2.2 Pin-out of M.2 slots
ECC Memory option
There is no current demand for ECC memory – however the main PCB has been designed to support ECC
memory. If in the future ECC is required it may be possible to specify a suitable processor, chipset and
memory to implement this feature.
Note: ECC CPU support list Intel Skylake CPU i3-6100TE
Software
The system will support Ubuntu 16.04.6 and Debian 10.0.0 operating systems. The operating system can be
installed on either the m.2 2280 motherboard slot, cFast or removable 2.5” SSD device. As standard the
Pin#
M.2 slot 1&2
(for LN940)
M.2 Key B
(for SATA)
Location AFM MB
1 NGFF_1_CONFIG3 NGFF_CONFIG3
2 P3V3_SB_MPCIE_1 P_+3V3_NGFF
3 GND GND
4 P3V3_SB_MPCIE_1 P_+3V3_NGFF
5 GND GND
6 NGFF_1_PWROFF_L NGFF_PWROFF_L
7 NGFF_1_USB2_P USB2_NGFF_DP
8 NGFF_1_W_DISABLE_L NGFF_W_DISABLE_L
9 NGFF_1_USB2_N USB2_NGFF_DN
10 NGFF_1_WWAN_LED NC
11 GND GND
12~19 SLOT KEY SLOT KEY
20 NC NC
21 NGFF_1_CONFIG0 NGFF_CONFIG0
22 NC NC
23 NGFF_1_WAN_WAKE_L NC
24 NC NC
25 NGFF_1_DPR NC
26 NGFF_1_GPS_DISABLE_L NC
27 GND GND
28 NC NC
29 NGFF_1_USB3_R_RX_N USB3_NGFF_RXN
30 NGFF_1_SIM1_RST NC
31 NGFF_1_USB3_R_RX_P USB3_NGFF_RXP
32 NGFF_1_SIM1_CLK NC
33 GND GND
34 NGFF_1_SIM1_DAT NC
35 NGFF_1_USB3_C_TX_N USB3_NGFF_TXN
36 MODEM_SIM1_VSIM NC
37 NGFF_1_USB3_C_TX_P USB3_NGFF_TXP
38 NC NGFF_DEVSLP
39 GND GND
40 NGFF_1_SIMDET2 NC
Pin#
M.2 slot 1&2
(for LN940)
M.2 Key B
(for SATA)
Location AFM MB
41 NC NGFF_SATA_RXP
42 NC NC
43 NC NGFF_SATA_RXN
44 NC NC
45 GND GND
46 NC NC
47 NC NGFF_SATA_TXN
48 NC NC
49 NC NGFF_SATA_TXP
50 NGFF_1_PERST_N PLTRST_NGFF-L
51 GND GND
52 NC NGFF_CLK_REQ-L
53 NC PCH_PCIE_CLK8_N
54 NGFF_1_PEWAKE_L NGFF_PCIE_WAKE-L
55 NC PCH_PCIE_CLK8_P
56 NC NC
57 GND GND
58~65 NC NC
66 NGFF_1_SIMDET NGFF_SIM_DET
67 NGFF_1_WAN_RESET_L WWAN_RESET-L
68 NC NGFF_SUSCLK
69 NGFF_1_CONFIG1 NGFF_CONFIG1
70 P3V3_SB_MPCIE_1 P_+3V3_NGFF
71 GND GND
72 P3V3_SB_MPCIE_1 P_+3V3_NGFF
73 GND GND
74 P3V3_SB_MPCIE_1 P_+3V3_NGFF
75 NGFF_1_CONFIG2 NGFF_CONFIG2