User`s manual

38 • Driver Installation
Novell Netware, DOS Setup for Novell NetWare DOS
All the above drivers are included in the ADLINK All-In-One CD. In the
following section, driver installation for Windows 2000/XP, Windows 98 and
Windows NT are outlined. For driver installation of non-Windows Operating
Systems, refer to the readme file in the following path location.
X:\PXI_Platform\PXI Controller\PXI-3710_3710F\LAN\100PDisk
4.3.2 LAN Driver Installation on Windows 2000/XP
Windows 2000/XP will attempt to install a LAN driver automatically. To
guarantee compatibility, manually install the latest LAN drivers, which are
stored on the ADLINK All-In-One CD. After installing Windows 2000/XP,
update to the new drivers by following these procedures:
1. Boot Windows 2000/XP, Click Start. Select Settings then double-click
the Control Panel option.
2. Double-click the System icon, click the Hardware tab, and then click
the Device Manager button.
3. Double-click the Network Adapters entry and select the Intel
82562EM - based PCI Ethernet Adapter (10/100).
4. Click the Driver tab, then click the Update Driver… button.
5. An Upgrade Device Driver Wizard window will appear, click Next>.
6. Select Display a list of ... and click Next>. The next window shows a
list of hardware models.
7. Insert the CD and click Have Disk.
8. Browse the Intel 82562 driver in the following path location:
X:\PXI_Platform\PXI Controller\PXI-3710_3710F\Lan\100PDisk,
highlight oemsetup.inf, click Open, then click OK.
9. Highlight the model: Intel 8255x- based PCI Ethernet Adapter
(10/100), then click Next>. An Update Driver Warning window may pop
up, click on Yes to continue.
10. A summary window appears, click Next>, click the Finish button, and
then CLOSE to finish the installation.