User`s manual

36 • Driver Installation
Insert the ADLINK All-In-One CD, run
SETUP.EXE
at
X:\PXI_Platform\PXI
Controller\PXI-3710_3710F\Chipset\I815\Win9x2k\Disk1
(where X is the CD-ROM drive).
Click 'Next' on Welcome Screen to read and agree to the license agreement.
Click Yes if you agree to continue. NOTE: If you click No, the program will
terminate.
Click 'Finish' to restart the system when prompted to do so.
Follow the screen instructions and use default settings to complete the setup
when Windows is restarted. After restarting, Windows will display that it has
found various new hardware and installs drivers for each one. If one
New
Hardware Found
dialog box is displayed requesting the location of the
drivers, use the mouse to click on the scrollbar and select the Windows
directory.
Select Yes, when prompted to restart Windows.
To install the Windows drivers for the PXD-3710/3710F system controller,
refer to the installation information in this chapter. For installation information
for non-Windows operating systems, please contact an ADLINK service
center. The Windows drivers are located in the following directories of the
ADLINK All-In-One CD:
Chipset driver
\PXI_Platform\PXI Controller\
PXI-3710_3710F\Chipset\I815
VGA/AGP relative driver
\PXI_Platform\PXI Controller\
PXI-3710_3710F\815E VGA Driver
LAN relative driver
\PXI_Platform\PXI Controller\
PXI-3710_3710F\Lan\100PDisk
Watchdog relative library
\PXI_Platform\PXI Controller\
PXI-3710_3710F\Wdt
The Bus-mastering IDE drivers are automatically installed by Windows.
Since Windows NT is not a Plug and Play OS, here are some useful tips for
installing Windows NT drivers:
1. Install the LAN driver before installing any service pack.
2. Install the VGA/AGP driver after installing the service pack. Make sure
the service pack supports AGP. Service pack 6 or higher is
recommended.
3. If Windows NT boots with a warning message, check the Event Viewer to
view the source generating the warning message. If it can’t be solved,
reinstall the Windows NT service pack, and then install the drivers in a
different sequence.