User`s manual

14 • Introduction
IEEE 802.3 10Base-T/100Base-TX compatible
Supports Intel pre-boot execution environment (PXE) for remote
booting in Windows NT/2000
On Board Super I/O
Chip: Winbond W83627HF
LPT: one high-speed bi-directional SPP/EPP/ECP parallel port
FDD: one high density FDD connector
COM Ports:
Two 16C550 UARTs compatible COM ports
COM1 available on front faceplate, RS-232/422/485 jumper
selectable (With RS-485+ Auto-Direction Technology)
ESD protection to 2kV
COM2 on rear I/O transition module, PXD-R3000
Keyboard and Mouse interface: one PS2 keyboard connector
and one PS2 mouse connector
Watchdog Timer:
Programmable intervals: 1-255 seconds or 1-255 minutes
The watchdog timer time out will generate an interrupt to NMI or
RESET, selectable in BIOS menu.
Hardware Monitoring: Winbond W83627HF, monitors CPU
temperature, system temperature and DC Voltages
Flash Disk Support Options
User can select the 2.5 inch Flash disk options
Supports two CompactFlash type II sockets. CF1 socket is
based on internal secondary IDE interface. CF2 socket is hot
swappable interface on the front panel
LED
System active LED: Green LED will light after POST, and turns
dark when system power-off
IDE LED: Yellow LED flashes when accessing IDE ports
WDT LED: Red LED is dark when power on. After enabling the
WDT via software, the LED will flash. When WDT timeout occurs,
the LED will stay on
General purpose LED: This is a programmable BLUE LED
Form factor
PXD-3710: Standard 3U PXI/CompactPCI, 12HP wide (3-slot)
PXD-3710F: Standard 3U PXI/CompactPCI, 16HP wide (4-slot)
Environment
Operating ambient temperature: 0 to 55 °C
Storage temperature: -20 to 80 °C
Humidity: 5 to 95% noncondensing