User`s manual

Appendix A 51
PXI-3920/3910
User’s Manual
TRIG_Trigger_Route
@ Description
Routes the trigger signal between the trigger I/O SMB connec-
tor on the faceplate and the PXI trigger bus on the backplane.
This function also allows routing the software-generated trigger
signal to SMB connector or trigger bus.
@ Supported controllers
PXI-3920, PXI-3910, PXI-3800
@ Syntax
C/C++
I16 TRIG_Trigger_Route (U32 source, U32 dest, U32
halfway)
Visual Basic
TRIG_Trigger_Route (ByVal source As Long, ByVal
dest As Long, ByVal halfway As Long) As
Integer
@ Parameters
source
Source Trigger Routing
Available value Description
PXI_TRIG_VAL_SMB SMB connector on the faceplate
PXI_TRIG_VAL_SOFT Software-generated trigger signal
PXI_TRIG_VAL_TRIG0 PXI trigger bus #0
PXI_TRIG_VAL_TRIG1 PXI trigger bus #1
PXI_TRIG_VAL_TRIG2 PXI trigger bus #2
PXI_TRIG_VAL_TRIG3 PXI trigger bus #3
PXI_TRIG_VAL_TRIG4 PXI trigger bus #4
PXI_TRIG_VAL_TRIG5 PXI trigger bus #5
PXI_TRIG_VAL_TRIG6 PXI trigger bus #6
PXI_TRIG_VAL_TRIG7 PXI trigger bus #7