User`s manual

Getting Started 37
PXI-3920/3910
User’s Manual
Boot from USB external hard drive
X Connect a bootable USB external hard drive via a USB port
on the faceplate.
X Power on the PXI-3920/3910 and enter BIOS to modify the
setting of boot device as following:
Z [Advanced BIOS Features] » [First Boot Device] » [Hard
Disk]
Z [Advanced BIOS Features] » [Hard Disk Boot Priority] »
[USB-HDD0]
X Save the change
X Reboot the system
Boot from USB floppy drive
X Connect the USB floppy drive via a USB port on the face-
plate.
X Put a bootable disk in the USB floppy drive.
X Power on the PXI-3920/3910 and enter BIOS to modify the
setting of boot device as following:
Z [Advanced BIOS Features] » [First Boot Device] » [USB-
FLOPPY]
X Save the change
X Reboot the system
NOTE:
NOTE:
If there are multiple USB external devices installed, you
will see USB-HDD0, USB-HDD1 and etc. Please recog-
nize the boot device according the model name of
device come after the USB-HDDx on the screen