User`s manual

Getting Started 35

PXI-3920/3910

User’s Manual

3.8 Setting PXI-3920/3910 Boot Devices

The PXI-3920/3910 controller by default boots up from the SATA

hard drive. However, you can also set a USB device or a CF card

as the boot device in BIOS. Please follow the instructions below to

set the boot device of PXI-3920/3910.

Boot from SATA hard drive

X Make sure the bootable SATA hard drive is installed in the

hard drive bracket.

X Power on the PXI-3920/3910 and enter BIOS to modify the

setting of boot device as following:

Z [Advanced BIOS Features] » [First Boot Device] » [Hard

Disk]

Z [Advanced BIOS Features] » [Hard Disk Boot Priority] »

[Ch2 M.]

X Save the change

X Reboot the system

Boot from on-board CF card

X Make sure the bootable CF is firmly installed in the CF

socket.