User`s manual

30 Getting Started
PXI-3920/3910
User’s Manual
3.4 Hard Drive Replacement
By default, the PXI-3920/3910 PXI controller is shipped with a 2.5"
80 GB SATA hard drive pre-installed. For users who need to
change the SATA hard drive or use a solid state disk (SSD) as the
replacement hard drive, please follow the instructions below.
1. The hard drive is located on the back side of the PXI-
3920/3910 controller. Locate the four screws that atta-
che the hard drive to the bracket.
2. Loosen the screws.