User`s manual

26 Hardware Overview
3.5 BP-8014
This section describes the architecture and jumper settings of the
BP-8014 backplane. The BP-8014 is for PCIS-8580-13S and is
pre-installed in the RK-8014 chassis. The BP-8014 is specially
designed to provide the remote power-on capability. When users
turn on the host computer, the extension chassis will be automati-
cally actuated. If the remote power-on function is enabled, the
standard power-on sequence mentioned in Section 2.3 can be
neglected.
Backplane Architecture
The BP-8014 backplane provides 1 system slot and 13 available
PCI peripheral slots. The system slot is occupied by a pre-installed
LPCI-8575 PCI extension card. The rest PCI slots are available for
any 5V PCI peripheral cards.
Figure 3-7: Top view of BP-8014 backplane