User`s manual

12 Getting Started
PCI/cPCI-6208/6216-GL Series
User’s Manual
Installing Hardware
X Locate your PCI-6208/6216-GL Series card.
X Turn off the system/chassis and disconnect the power cord
and plug from its power source.
X Remove the system/chassis cover.
X Select the PCI slot that you intend to use, then remove the
bracket (usually fixed with a retention screw) at the end of
the PCI slot, if any.
X Align the card connectors (golden fingers) with the slot, then
press the card firmly until the card is completely seated in
the slot.
X Secure the card to the chassis with the bracket retention
screw.
X Replace the system/chassis cover.
X Connect the power cord to a power source, then reboot the
system/chassis.