User`s manual
Table Of Contents
- ECS-8582-4S
- Revision History
- Preface
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Getting Started
- 3 Hardware Information
- 3.1 Functional Block Diagram
- 3.2 EC-8560
- 3.3 PCI-8565 Layout, Connectors and Jumpers
- 3.4 RK-8005 4-Slot Extension Chassis
- 3.5 BP-8005 Layout, Connectors and Jumpers
- Figure 3-7: BP-8005 Backplane Layout
- Table 3-4: BP-8005 Connectors, Jumpers and LED
- Table 3-5: BP-8005 CN1 LED Connector
- Table 3-6: BP-8005 CN2 ATX Power Connector
- Table 3-7: BP-8005 CN3 Fan Connector
- Table 3-8: BP-8005 CN4 ATX Power OK Status Connector
- Table 3-9: BP-8005 JP1 LED Connector
- Table 3-10: BP-8005 JP2 ATX Power Enable Connector
- Table 3-11: BP-8005 JP3 Fan Connector
- 3.6 Extension Cable Options
- 4 Troubleshooting (FAQ)
- Important Safety Instructions
- Warranty Policy

Introduction 3
ADLINK Technology, Inc. ECS-8582-4S
Copyright 2008 User’s Manual
1.3 Specifications
EC-8560 (on host laptop computer)
X Compliant with ExpressCard Standard Release 1.2
X Compliant with PCI Express Base Specification Rev. 1.0a
X PCI Express X1 link with 250 MB/s data throughput
X Extended distance of up to seven meters
X Dimension: ExpressCard/34 (108 mm (W) X 34 mm (H))
X Power requirements: +3.3V, 210 mA (max)
PCI-8565 (on extension system)
X Compliant with PCI-to-PCI Bridge Architecture Specifica-
tions Rev. 1.2
X Compliant with PCI Local Bus Specifications Rev. 3.0
X Supports 5V and 3.3V PCI bus
X Supports 32-bit/33MHz full data throughput
X Extended distance of up to 7 meters
X Dimensions: Low-profile PCI add-on card (64mm (H) X
120mm (W))
X Power requirements: +3.3V, 720mA
RK-8005 (extension chassis)
X Dimension: 122mm (W) X 195 mm (H) X 259 mm (D)
X Weight: 3.2 kg (7.04 lb)
X Backplane: 5 X 32-bit/33 MHz full-size PCI slots
Z One slot for extension card
Z Four slots available for PCI cards
X Power supply
Z Input voltage: 85 VAC to 265 VAC
Z Output: 200 W
X Cooling: One 80 mm ball bearing fan