User`s manual

62 BIOS Settings and Driver Installation
Matrix MXC-4000 Series
User’s Manual
4.2.3 Install the Ethernet Driver
This section describes the procedure to install the Ethernet driver
of MXC-4000 series. Please follow the steps to install the driver for
Intel WG82574L Gigabit Ethernet controller.
For Windows 2000 and XP users:
1. Close any running application.
2. Insert the ADLINK All-in-One DVD. The chipset driver is
located in the directory:
x:\Driver Installation\Matrix\MXC-4000\LAN-Intel\
where x: denotes the DVD-ROM drive.
3. Execute setup.exe and follow on-screen instructions to
complete the setup.
4. After installation completes, reboot your system.