User`s manual

Introduction 33
MXC-6300
to operate in IDE or AHCI mode in BIOS.This SATA connector is
designed to support a 2.5 inch hard disk drive (HDD) or solid state
disk (SSD). The HDD or SSD must be installed into the SATA con-
nector with a HDD bracket. Please refer to Section 3.1 for installa-
tion of a 2.5 inch HDD or SSD.
1.7.9 Backboard to System PCB Connector
This connector connects the backboard to a golden finger-
equipped mainboard PCB.
PRELIMINARY