User`s manual

Introduction 21
MXC-6300
1.6.8 DVI-I connector
The MXC-6300 provides one DVI-I connector providing connec-
tion to an external monitor. The DVI-I connector can be separated
into VGA and DVI-D (single link) interfaces using the included
ADLINK Y-cable.
Table 1-7: DVI-I Connector Signals
CAUTION:
Since VGA signals are analog based, VGA display quality is
greatly affected by quality and length of cable used. We
strongly recommended VGA cable less than 2 meters in length
with effective shielding, such as UL style 2919 AWM.
Pin Signal Pin Signal Pin Signal Pin Signal
1 DVIdata 2- 9 DVIdata 1- 17 DVIdata 0- C1
Analog
Red
2 DVIdata 2+ 10 DVIdata 1+ 18 DVIdata 0+ C2
Analog
Green
3 GND 11 GND 19 GND C3
Analog
Blue
4 CRT DDC clock 12 N/C 20 N/C C4
Analog
horiz.
sync
5 CRT DDC data 13 N/C 21 N/C C5
Analog
GND
6 DVIDC clock 14 +5V 22 GND C1
Analog
Red
7 DVIDC data 15 GND 23 DVI clock +
8
Analog vert.
sync
16
Hot plug
detect
24 DVI clock -
PRELIMINARY