User`s manual

BIOS Settings and Driver Installation 45
Matrix MXE-1000 Series
User’s Manual
Redirection after BIOS POST
This option allows you to set Redirection configuration after
BIOS POST. Available options are Disabled, Boot Loader, and
Always.
Terminal Type
This option is used to specify either VT100/VT-UTF8 or ANSI
terminal type. Availablevalue is ANSI, VT100, or VT-UTF8.
VT-UTF8 Combo Key Support
This option enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals. Available options are Enabled and Dis-
abled.
Sredir Memory Display Delay
This option specifies the delay in seconds to display memory
information. Available options are Delay, Delay 1 Sec, Delay 2
Sec, and Delay 4 Sec.
Option Description
Disabled Turn off the redirection after POST.
Boot Loader Activate the redirection during POST and Boot Loader.
Always Always activate the redirection.
Table 4-2: Redirection after BIOS POST