User`s manual

36 Getting Started
Matrix MXE-1000 Series
User’s Manual
3.5 Mounting the MXE-1005/1010/1020 Controller
The MXE-1005/1010/1020 controller is shipped with a VESA 100
wall-mount bracket. The bracket has four M4 mounting holes with
a pitch of 100 mm so you fix it to any VESA 100 compatible
mounting mechanism. With the mounting bracket, you can either
mount the MXE-1005/1010/1020 controller on the wall or on the
back of a monitor.
The procedures of mounting MXE-1000 series are illustrated step
by step below:
1. You need the wall-mount bracket shipped with chassis
and four M4 screws in the screw pack.