User`s manual

Getting Started 33
Matrix MXE-1000 Series
User’s Manual
3.3 Installing a CF Card
The MXE-1005/1010/1020 controller provides a CompactFlash
socket on the front panel to accommodate a CF card as a replace-
ment of hard disk drive. You can also install a SATA hard disk
drive and CF card simultaneously and set the boot device prefer-
ences in BIOS. Please follow the instructions below to install the
CF card.
Note: The connectors of the MXE-1005/1010/1020 controller
are placed upside down. To avoid the possibility that a CF
card falls into the chassis, we strongly suggest you place
the chassis upside down before you install the CF card.
1. Place the system upside down. Let the top side of CF
card face up and insert it into CF socket on the front
panel.