User`s manual

System Description 21
Matrix MXE-1000 Series
User’s Manual
2.3.4 IEEE 1394b ports (for MXE-1020 only)
The MXE-1020 controller has two IEEE 1394b ports which are
implemented by TI XIO2213A OHCI host controller on the rear
panel. These two 1394b ports are dedicatedly designed for con-
necting 1394a or 1394b cameras. The 1394b host controller sup-
ports the following features:
 Full x1 PCI Express Throughput
 Fully Compliant with PCI Express Base Specification, Revi-
sion 1.1
 Fully supports provisions of IEEE P1394b-2002
 Fully Compliant With Provisions of IEEE Std 1394-1995 for
a High-Performance Serial Bus and IEEE Std 1394a-2000
 Fully Compliant with 1394 Open Host Controller Interface
Specification, Revision 1.1 and Revision 1.2 draft
 Three IEEE Std 1394b Fully Compliant Cable Ports at 100M
Bits/s, 200M Bits/s, 400M Bits/s, and 800M Bits/s
 Cable Ports Monitor Line Conditions for Active Connection
To Remote Node
 Cable Power Presence Monitoring
 EEPROM Configuration Support to Load the Global Unique
ID for the 1394 Fabric
Each 1394b port has a link status LED. When you connect a
1934b device to its 1394b port, the LED is on.