User`s manual

12 System Description
Matrix MXE-1000 Series
User’s Manual
2.2.4 Reset Button
The reset button is used to perform hard reset for MXE-1005/
1010/1020 controller. You can use a pin-like object to push the
reset button.
2.2.5 VGA connector
The VGA connector is used to connect your MXE-1005/1010/1020
controller to a monitor. MXE-1000 series supports only analog
(VGA) monitors.
2.2.6 USB 2.0 connectors
The MXE-1005/1010/1020 controller provides four USB 2.0 ports
in Type A USB connectors on the front panel. All USB ports are
compatible with high-speed, full-speed and low-speed USB
devices. The MXE-1000 series supports multiple boot devices,
including USB flash drive, USB external hard drive, USB floppy,
USB CD-ROM and etc. The boot priority and boot device can be
configured in BIOS. Please refer to Section 4.1 for detail.