User`s manual

54 BIOS Settings and Driver Installation
Matrix MXC-2000 Series
User’s Manual
4.1.3 Chipset
4.1.3.1 North Bridge Configuration
DRAM Frequency
Specify DRAM frequency. You can specify whether let BIOS set
DRAM frequency automatically or configure it manually (400
MHz or 533 MHz).
Configure DRAM Timing by SPD
Specify Enable to allow the timing setting of DRAM to be con-
figured from SPD or Disable to configure it manually.
Boots Graphic Adapter Priority
Specify which graphics controller to use as the primary boot
display device. Please note that MXC-2000 series only sup-
ports Intel integrated graphic device (IGD). You should always
set this option as IGD to ensure normal operation.
Internal Graphics Mode Select
Specify the size of system memory used by internal graphics
device. 8MB is recommended.