User`s manual

BIOS Settings and Driver Installation 49
Matrix MXC-2000 Series
User’s Manual
This option allows you to set Redirection configuration after
BIOS POST. Available options are Disabled, Boot Loader, and
Always.
Terminal Type
This option is used to specify either VT100/VT-UTF8 or ANSI
terminal type. Availablevalue is ANSI, VT100, or VT-UTF8.
VT-UTF8 Combo Key Support
This option enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals. Available options are Enabled and Dis-
abled.
Sredir Memory Display Delay
This option specifies the delay in seconds to display memory
information. Available options are Delay, Delay 1 Sec, Delay 2
Sec, and Delay 4 Sec.
4.1.2.6 ACPI Configuration
Suspend Mode
This setting specifies either S1 (POS) or S3 (STR) system sus-
pend mode. The Optimal and Fail-Safe Default setting is S3
(STR).
Option Description
Disabled Turn off the redirection after POST.
Boot Loader Activate the redirection during POST and Boot Loader.
Always Always activate the redirection.
Table 4-1: Redirection after BIOS POST
Option Description
S1 (POS)
Power On Suspend - Maintain current system status,
such as power supply and memory context, except for
CPU is not executing instructions. Devices that can
wake-up the system can cause CPU to continue execute
from where it left off.
Table 4-2: Suspend Mode