User`s manual

BIOS Settings and Driver Installation 47
Matrix MXC-2000 Series
User’s Manual
Hard Disk Write Protect
Set this option as Enabled to prevent the hard disk drive from
being overwritten.
IDE Detect Time Out
This option allows you to stop searching for IDE devices within
the specified number of seconds.
ATA(PI) 80Pin Cable Detection
Selects the mechanism for detecting the type of IDE cable
used.
4.1.2.3 SuperIO Configuration
Serial Port1/ Port2/ Port3/ Port4 Address
These four options specify the base I/O port address of serial
port1 to serial port4.
Note: Do not set the same value for different serial ports to
avoid resource conflict.
4.1.2.4 Hardware Health Configuration
The hardware health option allows users to monitor hardware sta-
tus including CPU temperature, system temperature, and system
voltages (Vcore, +5V, +3.3V, +12V, +1.8V, 5VSB, VBAT).